Get Your Commercial Solar Proposal — Fast & Free
Includes site visit, system design & quote. Start saving today!
Contact Us
Get genuine advice from our solar experts. No pressure, book only if you are satisfied!
7818886988
Get genuine advice from our solar experts. No pressure, book only if you are satisfied!
7818886988
50 KW Commercial Solar Panel Installation – Delhi
⚡ DISCOM: BSES Yamuna Power Limited
☀️ Installed By: Sunrise Solar Solutions
🔋 System Capacity: 50 kW
📌 Project Overview
The Al Hilal Committee, which currently incurs high electricity expenses across three
commercial meters—each averaging ₹50,000 to ₹60,000 per month—can
significantly benefit from a solar energy solution. After a thorough evaluation of their
energy usage patterns and available rooftop area, a 50 kW grid-connected solar
power plant has been proposed. This system is expected to generate enough
electricity to substantially offset their combined monthly bills, leading to savings of up
to ₹60,000–₹70,000 every month. With net metering in place, any excess energy will
be exported to the grid, further optimizing cost reduction. Over a span of 25 years,
this plant not only ensures major financial savings but also positions the Committee
as a responsible, eco-conscious organization contributing to a greener future.
⚙️ System Highlights
● Plant Capacity: 50 kW
● Expected Generation: ~250 units/day (5 units/kW/day)
● Annual Generation: ~91,250 units/year
● Technology Used: High-efficiency Adani Topcon solar modules, Luminous inverter
● Net Metering: Approved and synchronized under BYPL
💡 Results & Benefits
● ✅ Electricity Bill: Reduced to zero for multiple connections
● ✅ Savings: Approx. ₹6–7 lakh/year in electricity cost
● ✅ Return on Investment: Achieved within 3 years
● ✅ Environmental Impact: Offset of over 50 tons of CO₂ annually
● ✅ Energy Independence: Zero power cuts and sustainable operations
30 kW Rooftop Solar System For Buissness - Pitampura Delhi
📍 Location: Pitampura, Delhi
⚡ DISCOM: Tata Power Delhi Distribution Limited (TPDDL)
☀️ Installed By: Sunrise Solar Solutions
🔋 System Capacity: 30 kW
🧰 Equipment: Luminous Panels & Luminous Inverter
📌 Project Overview
Mr. Nija Nand, a business owner in Pitampura, Delhi, was looking to cut down
on his rising monthly electricity bills. After evaluating his options, he partnered with
Sunrise Solar Solutions to install a 25 kW rooftop solar system using Luminous
panels and inverter, approved and connected under TPDDL’s net metering system.
⚙️ System Highlights
● Plant Capacity: 25 kW
● Expected Daily Generation: 125 units/day (5 units/kW/day)
● Estimated Annual Generation: ~45,625 units/year
● Technology Used: Luminous solar panels & inverter
● Net Metering: Approved under Tata Power DDL
💡 Results & Benefits
● ✅ Monthly Electricity Bill: Reduced from ₹25,000+ to under ₹2,000
● ✅ Payback Period: Less than 3 years
● ✅ Annual Savings: ~₹5–6 lakh/year
● ✅ Clean Energy Contribution: Offset ~40 tons of CO₂ annually
● ✅ 100% Grid Compliance: Seamless integration under TPDDL net metering
50 kW Industrial Rooftop Solar – Gaziabad
📍 Location: Gaziabad, UP
⚡ DISCOM: UPPCL
☀️ Installed By: Sunrise Solar Solutions
🔋 System Capacity: 50 kW
⚙️ System Highlights
● Plant Capacity: 25 kW
● Expected Generation: ~250 units/day (5 units/kW/day)
● Annual Generation: ~91,250 units/year
● Technology Used: High-efficiency Adani Topcon solar modules, Luminous inverter
● Net Metering: Approved and synchronized under UPPCL
💡 Results & Benefits
● ✅ Electricity Bill: Reduced to negative for multiple connections
● ✅ Savings: Approx. ₹7.5–9 lakh/year in electricity cost
● ✅ Return on Investment: Achieved within 3.5 years
● ✅ Environmental Impact: Offset of over 30 tons of CO₂ annually
● ✅ Energy Independence: Zero power cuts and sustainable operations
💸 Electricity Bill – Before vs After Solar
Many Indutries see lower electricity bills in the off-season, but solar still generates electricity year-round. That means:
✅ In peak season, solar cuts your high bills drastically.
✅ In off-season, the extra energy goes back to the grid – earning you credits through net metering.
✅ Over the year, you save big – regardless of usage pattern.
Installation Requirements for Commercial Rooftop Solar Panels
At Sunrise Solar, we handle all commercial rooftop solar installation requirements, ensuring a seamless process from the evaluation phase to final system setup. Here are the key requirements for a successful commercial solar panel installation: - **Roof Inspection for Structural Strength**: A commercial rooftop solar system adds approximately 15 kg per square meter to the roof. We perform thorough strength evaluations to confirm your roof can withstand this load without compromising safety or durability. - **Type of Roof**: - For RCC roofs (Reinforced Cement Concrete), elevated hot-dip galvanized steel mounting structures are used, allowing continued utilization of rooftop space. - For metallic sheet roofs, lightweight, corrosion-resistant aluminum rail structures are the optimal choice for durability and efficiency. - **Slope, Direction, and Mounting Angle**: Solar panels achieve maximum energy generation when installed on a South-facing slope. The ideal solar panel tilt angle varies: - **South India**: ~10° - **North India**: Above 20° due to latitude differences. Additionally, the installation area should remain shadow-free between 9 AM and 4 PM to optimize sunlight capture. - **Safe and Direct Rooftop Access**: Easy rooftop access is essential for the safe transport of materials during installation. Post-installation, safe access facilitates regular solar panel maintenance, including fortnightly cleaning and inspections. At Sunrise Solar, we ensure all these factors are addressed, delivering efficient and long-lasting commercial solar power solutions that meet your energy needs while adhering to industry standards.
Our Process here at sunrise for Commercial Solar Panel Installation
Did you know that 99% of commercial rooftops remain underutilized? Installing solar panels on your commercial rooftop is the smartest way to maximize this valuable space while saving on electricity costs. By choosing commercial rooftop solar systems, you can eliminate the need to pay exorbitant rates of ₹12, ₹14, or ₹16 per unit. After installation, solar energy becomes completely free, allowing you to reduce your electricity bills by more than 70%. Sunrise Solar is a trusted leader in commercial solar installation, helping businesses across India transition to renewable energy solutions. Our goal is to make solar adoption seamless and cost-effective for every customer. Whether your rooftop is an RCC terrace or a metallic sheet roof, we offer customized solar panel systems for commercial buildings to match your specific energy needs. Even if your rooftop space is limited, we provide tailored solutions, including: - Net-metered commercial rooftop solar systems that enable you to export surplus energy to the grid and save even more. - Captive power plants without net metering for high energy requirements, ensuring your business remains energy independent. Embrace the future of energy with Sunrise Solar's reliable and efficient commercial solar power solutions, designed to optimize your rooftop space and minimize electricity costs.
Installation Requirements for Commercial Rooftop Solar Panels
At Sunrise Solar, we handle all commercial rooftop solar installation requirements, ensuring a seamless process from the evaluation phase to final system setup. Here are the key requirements for a successful commercial solar panel installation: - **Roof Inspection for Structural Strength**: A commercial rooftop solar system adds approximately 15 kg per square meter to the roof. We perform thorough strength evaluations to confirm your roof can withstand this load without compromising safety or durability. - **Type of Roof**: - For RCC roofs (Reinforced Cement Concrete), elevated hot-dip galvanized steel mounting structures are used, allowing continued utilization of rooftop space. - For metallic sheet roofs, lightweight, corrosion-resistant aluminum rail structures are the optimal choice for durability and efficiency. - **Slope, Direction, and Mounting Angle**: Solar panels achieve maximum energy generation when installed on a South-facing slope. The ideal solar panel tilt angle varies: - **South India**: ~10° - **North India**: Above 20° due to latitude differences. Additionally, the installation area should remain shadow-free between 9 AM and 4 PM to optimize sunlight capture. - **Safe and Direct Rooftop Access**: Easy rooftop access is essential for the safe transport of materials during installation. Post-installation, safe access facilitates regular solar panel maintenance, including fortnightly cleaning and inspections. At Sunrise Solar, we ensure all these factors are addressed, delivering efficient and long-lasting commercial solar power solutions that meet your energy needs while adhering to industry standards.
How Does a Commercial Solar Rooftop System Work?
A commercial solar rooftop system is a well-designed integration of components working together to convert sunlight into usable electricity for commercial and industrial buildings. Here’s how the process works step by step: - **Solar Panel Installation**: A carefully calculated array of solar panels is installed on the rooftop at precise angles to maximize sunlight absorption. - **Solar Energy Conversion**: The photovoltaic (PV) cells in the panels capture sunlight and convert it into direct current (DC) electricity. - **Solar Inverter Functionality**: The DC electricity is then fed into a solar inverter, which converts it into alternating current (AC), making it compatible with standard electrical systems. - **Energy Distribution**: The generated AC power is utilized in one of two ways: - **With Net Metering**: The AC power flows through a bi-directional net meter, allowing surplus energy to be exported back to the grid. This enables significant savings on electricity bills. - **Without Net Metering**: The generated AC power is consumed directly within the building, eliminating the need for a bi-directional meter. By leveraging renewable solar energy, commercial rooftop systems help businesses reduce energy costs, lower carbon footprints, and achieve energy independence. Whether through net metering or direct consumption, these systems are a sustainable solution for powering commercial spaces.
How a Commercial Rooftop Solar System Functions with Net Metering
A commercial rooftop solar system with net metering offers a highly efficient way to manage energy consumption and reduce electricity costs. Here’s how it works: - **Bi-Directional Net Meter**: This essential component tracks both the power generated and the power consumed. During peak solar power generation hours (11 AM to 2 PM), excess energy produced by the solar panels is exported to the DISCOM (Distribution Company) via the net meter. - **Energy Export and Billing Credits**: The net meter records the surplus units exported to the grid. These exported units are deducted from your monthly electricity bill, offering substantial savings. - **Energy Import During Non-Solar Hours**: In the evening and nighttime, when solar power generation ceases, the system imports energy from the grid to ensure uninterrupted power for the commercial building. The balance of exported and imported energy is reconciled through the net metering system. By leveraging the net metering mechanism, businesses can maximize the benefits of solar energy, achieve energy cost efficiency, and contribute to a sustainable future. This system ensures seamless energy management while reducing dependency on traditional power sources.
Why Should Factories and Warehouses Switch to Solar Energy?
- **Cost Savings**: Switching to solar energy significantly reduces energy costs compared to traditional thermal power. By generating their own electricity, businesses can achieve massive savings on monthly utility bills. - **Quick Return on Investment (ROI)**: A commercial solar system is a one-time investment with a short payback period. Most businesses recover their initial costs within 3-4 years, making it a financially sound decision. - **Sustainability Advantage**: Adopting renewable energy solutions positions businesses as eco-friendly and socially responsible. Modern consumers and investors are increasingly favoring brands committed to reducing their carbon footprint. - **Reliability and Longevity**: With an average lifespan of 25-30 years, solar power systems provide a reliable and durable energy source. Maintenance is minimal, usually limited to routine cleaning for optimal performance. - **Government Incentives and Tax Benefits**: To promote renewable energy adoption, the Indian government offers various financial incentives, including subsidies, tax exemptions, and accelerated depreciation. These benefits make solar energy even more attractive for businesses. By transitioning to solar power, factories and warehouses can reduce operational costs, enhance sustainability credentials, and secure long-term energy independence.
We recently installed a solar system on our commercial rooftop with Sunrise Solar Solutions in Delhi, and the experience was seamless. The team was professional, efficient, and highly knowledgeable. Installation was completed on time with minimal disruption, and the system is performing exceptionally well. We’re already seeing significant savings on our electricity bills. Highly recommend [Company Name] for any business considering solar – reliable service and great results!
Highly recommended... Very professional and experienced team. I m fully satisfied with their services. Thanks sunrise solar.
5-Star Review for Sunrise Solar Solutions – 35 kW Commercial Solar Installation in Delhi I was looking for a reliable solar solution for my commercial property in Delhi and I’m glad I found this company. They provided the best combination of competitive pricing, premium product quality, and professional service. For my 35 kW solar plant, they installed Waaree TOPCon solar panels and a Luminous inverter, both of which are top-tier components known for performance and durability. The team guided me properly from the initial consultation to final commissioning, handling everything from design to installation with complete professionalism. The project was completed on time, and the system is now running smoothly with zero electricity bills, exactly as promised.
Switching to solar empowers businesses to cut electricity costs, gain energy independence, and boost profitability. Commercial and industrial units can turn unused rooftops into revenue-generating assets, reduce carbon footprint, and avoid rising tariffs — all while supporting sustainable growth. Invest in solar and power your future, profitably.
